LUM CONNECT light management system
Daylight and presence sensors
Lighting is often planned with no regard to people and their workplace. It is not unusual that the largest part of energy is wasted for light in empty offices, corridors and lobbies – during the evening, in the night or even during the day. To prevent such misuse, Waldmann has developed the smart holistic light management system, which allow energy saving by means of modern technologies such as presence detectors and daylight sensor systems at a whole new level. |
HFMD SensorThe HFMD (High Frequency Motion Detector) sensor system developed by Waldmann is unique. The innovative, highly sensitive system detects even the smallest movement within a definable area. Accordingly, the luminaires switch on when someone enters the room and automatically switch off again when the person leaves. Furthermore, the amount of lighting is adjusted based on the level of daylight. The energy consumption of individual luminaires can be reduced by up to 50% in this way when compared to the installed output. The HFMD sensor operates independently of temperature, analyzes a larger detection area and detects presence, even if there is an absence of significant movements over a certain period of time. |
Innovative, highly sensitive multi-channel presence and daylight sensor system
Even the smallest movements are captured
Temperature-independent operation
The amount of lighting is adjusted based on the level of daylight
Reduced energy consumption by individual luminaires by up to 50%
Can be combined with LUM CONNECT VTL and
LUM CONNECT TALK
PIR SensorThe PIR daylight and presence sensor operates is temperature-dependent. The presence of persons is reliably detected within a defined field by means of passive infrared motion sensors. The luminaires are consequently only switched on if the sensor registers a presence in the room and the daylight is no longer sufficient. This intelligent technology leads to significant energy savings. |
Classic presence and daylight sensor system
Temperature-dependent operation on a passive infrared basis
The luminaire only switches on when presence is detected or there is not enough daylight
Up to 50% energy savings possible
Can be combined with LUM CONNECT VTL and
LUM CONNECT TALK